Modern digital servoamplifiers are still used in central motion control architecture and are very often a replacement for obsolete analog amplifiers. Due to the powerful processors used in today's digital amplifiers it is possible to provide very useful software tools, including setup and tuning tools which makes life much easier for the user.
The available intelligence in these modern servo amplifiers can also be used to integrate more sophisticated tasks into the amplifier and make it a single axis motion controller including position control and indexer functionality.
Additionally many of the digital amplifiers of the latest generation are equipped with fieldbus interfaces like CANopen, Profibus, EtherCAT, etc. so that they also can be used in automation architectures with distributed intelligence.
To fulfill this feature list, we offer the servo drives of our partner company Copley Controls, for both AC and DC power supply voltages.
Contact us today to talk to an experienced MACCON engineer!
Modern digital servoamplifiers are still used in central motion control architecture and are very often a replacement for obsolete analog amplifiers. Due to the powerful processors used in today's digital amplifiers it is possible to provide very useful software tools, including setup and tuning tools which makes life much easier for the user. MACCON also acts as development partner for custom specific adaptation solutions for Copley drives. For example if it is useful to substitute discontinued drives with Copley drives. You can see a picture of a sample project ("TWE-180-09") on the above right-hand side. For more information, please refer to the following link. Please contact us, to discuss your technical requirements.
| Feature | Xenus | Accelnet | Junus |
|---|---|---|---|
| motor type | BLDC / DC | BLDC / DC | DC |
| commutation | Sine | Sine | - |
| supply voltage | 1x/3x 100 - 240 Vac | 20 - 180 Vdc | 20 - 180 Vdc |
| cont. current (Arms / Adc) | 0,7-14,1 / 1-20 | 0,7-8,5 / 1-12 | - / 5-10 |
| peak current (Arms / Adc) | 1,4-28,2 / 2-40 | 2,12-25,4 / 3-36 | - / 10-20 |
| fieldbus options | CANopen | CANopen EtherCAT | - |
| indexer | yes | yes | no |
| puls/direction | yes | yes | no |
| PWM (current or velocity) | yes | yes | yes |
| analog command | +/-10V (12bit) | +/-10V (12bit)* | +/-10V (12bit) |
| analog outputs | - | - | - |
| feedback | resolver (2-pole) halls incremental encoder (digital or sine/cosine) | halls incremental encoder (digital or sine/cosine) | Back-EMF |
| shape | panel micro-panel | panel micro-panel module micro-module | panel |
* in panel version only
